To open a can, push front of cutting assembly backwards to lift the blade. Make sure the flip-up magnet is in the up position. Tilt top of can in to position cutting blade inside rim of can. Push down top of cutting assembly to start the cutting action. To remove the can, hold the can and push backwards on front of cutting assembly again. To remove the cutting assembly for washing, twist release button on front of can opener clockwise and lift out cutting assembly. Wash, rinse, and dry thoroughly. If you want to wash the cutting assembly in the dishwasher, remove flip-up magnet first by grasping one side near hinge and pulling out slightly until magnet releases from hinge. To replace cutting assembly, place it in position and firmly press both sides until it snaps into place.
Another important consideration is where you plan to store your juicer and how easily you’ll want to access it. While horizontal-masticating juicers can churn out high volumes of juice, you may not have space for them. Plus, they tend to weigh more so tend to be difficult to move from closet to counter. The small footprint of vertical juicers is ideal for smaller kitchens with limited counter space and can often tuck under cabinets. Lightweight centrifugal models are perfect if you need to move your juicer from storage space to counter. Just make sure whatever model you pick can handle the volume of juice you plan to make: smaller juicers equal smaller amounts of juice per batch.
The best juicers extract as much liquid as possible from fruits and vegetables, leaving behind very little pulp. Machines that leave large amounts of very moist pulp just aren’t doing their job. The same is true for froth. Every juicer makes some froth, but you don't want inches of bubbles – you want a machine that gives you the most juice for your money.
Easy to use: In our experience, the size of a juicer’s feed tube makes the biggest difference when it comes to ease. The smaller the feed tube, the more time you need to prep your produce—kale needs to be cut into thinner, more manageable strips, large apples can’t be cut into simple wedges, and those fat carrots need to be quartered lengthwise instead of simply halved. During the course of a busy morning, those minutes can really add up, so we looked for juicers with larger tubes.
Of the two new juicers Omega introduced in 2017, the CUBE300S Juice Cube has the more unusual design. This horizontal single-auger juicer is designed to handle the same workload and produce the same results as our budget pick, the Omega J8004. In our research, we found that the much pricier Juice Cube didn’t produce a higher yield or have more practical features than the J8004.
The Hurom comes with a lidded pitcher for collecting juice, but its slow-turning auger produced so little splatter that we also had no problem putting our own glass directly under the juice spout. Clean juicing makes for means you’re not beholden to the Hurom’s pitcher, making it easier to juice straight into your to-go cup and reducing counter clean-up. (When we tried this with the Juiceman, we ended up with a foot-wide splatter radius.)
×