A "smoking motor" is usually caused from binding between the cutting unit clutch and the cutting assembly which connects to the motor. Unplug the blender and allow to cool. Once the blender is cool, check the cutting assembly (see the Use and Care instructions for your model for a parts diagram) to see if the blades "spin freely." Be careful, the blades are sharp. If the blades do not spin freely, the cutting unit needs to be replaced. Once the blender base (without container) is cool, plug it in and turn it on to see if it works properly. (If the unit was not turned off when the cutting unit locked, the motor could be damaged.)
Another important consideration is where you plan to store your juicer and how easily you’ll want to access it. While horizontal-masticating juicers can churn out high volumes of juice, you may not have space for them. Plus, they tend to weigh more so tend to be difficult to move from closet to counter. The small footprint of vertical juicers is ideal for smaller kitchens with limited counter space and can often tuck under cabinets. Lightweight centrifugal models are perfect if you need to move your juicer from storage space to counter. Just make sure whatever model you pick can handle the volume of juice you plan to make: smaller juicers equal smaller amounts of juice per batch.
The Hurom comes with a lidded pitcher for collecting juice, but its slow-turning auger produced so little splatter that we also had no problem putting our own glass directly under the juice spout. Clean juicing makes for means you’re not beholden to the Hurom’s pitcher, making it easier to juice straight into your to-go cup and reducing counter clean-up. (When we tried this with the Juiceman, we ended up with a foot-wide splatter radius.) 
×