Traditionally, this is the most common type of juicer. These typically utilize a fast-spinning metal blade that spins against a mesh filter, separating juice from flesh via centrifugal force. The juice and pulp are then separated into different containers. The problem with centrifugal juicers is that the fast-spinning metal blade generates heat, which destroys some of the enzymes in the fruits and vegetables you're juicing. The heat also oxidizes those nutrients, rendering less nutritious juice than a cold-press juicer.
Juicers that are simple to setup, use, take apart, and clean will get used more often versus relegating them to the bottom of a closet. However, if you want a multifunction juicer that also makes nut butter, sorbets, or baby food it may be worth some extra assembly. Juicers with large feed tubes significantly reduce produce prep time and also the time it takes to feed it into the machine. Juicers with external pulp containers allow you to continue juicing in bulk without pausing to remove pulp. Juicer cleaning can be daunting so seek models with specialized brushes that make cleaning easier, and dishwasher friendly is always a bonus. 
These are also called cold-press or auger-style juicers. These devices have an auger that grinds the produce, breaking down cell walls and releasing the juice, which is then squeezed through a steel screen. Masticating juicers take longer than extractors to produce your cup of juice, but yield more juice and leave more of the nutrients intact. If you like green juices with plenty of leafy, tough greens like kale, you’ll be happiest with this type of juicer. Many can also be used to make nut milk. You’ll pay quite a bit more for a cold-press juicer, however.
KitchenAid makes a juicing attachment for the Artisan stand mixer, the Masticating Juicer Attachment, as well as the standalone Maximum Extraction Juicer. In our research, we found that the Maximum Extraction Juicer didn’t compare to our picks in yields, extraction, build quality, or warranty (one-year limited). We don’t think it’s worth testing because it has too many shortcomings for its high price. The juicing attachment for the Artisan mixer is cheaper than a full juicer, but it gets poor reviews on Amazon for being hard to use and clean, and it seems to have difficulty with hard roots and vegetables.

To open a can, push front of cutting assembly backwards to lift the blade. Make sure the flip-up magnet is in the up position. Tilt top of can in to position cutting blade inside rim of can. Push down top of cutting assembly to start the cutting action. To remove the can, hold the can and push backwards on front of cutting assembly again. To remove the cutting assembly for washing, twist release button on front of can opener clockwise and lift out cutting assembly. Wash, rinse, and dry thoroughly. If you want to wash the cutting assembly in the dishwasher, remove flip-up magnet first by grasping one side near hinge and pulling out slightly until magnet releases from hinge. To replace cutting assembly, place it in position and firmly press both sides until it snaps into place.

Kuvings released the C7000 in 2017. Kohler said this model has improved features compared with the Kuvings Whole Slow Juicer (B6000), which didn’t impress us in testing. From watching a comparison review of the C7000 and the Whole Slow Juicer, we see that the C7000 has a new funnel for easily feeding produce, doesn’t produce as much pulp, and has a more recessed auger for easier cleaning compared with its predecessor. But the C7000 still spins faster than our pick at 60 rpm, and is more expensive at the time of writing. And although Kuvings juicers boast a 3-inch feed tube that, in theory, can accept whole fruit, most apples in the store are much bigger than three inches in diameter, so that’s a wash. When we tested the Whole Slow Juicer, it didn’t hold a candle to the juice quality from Tribest or Omega machines. The Kuvings Silent Juicer was also an underperformer, giving us over an ounce less of green juice than the Slowstar. The resulting juice was also unpleasantly pulpy.


The Cuisinart Juice Extractor CJE-1000 is one of the best juicers in our review. It is a powerful machine that produces a lot of juice with very little froth output. It is quieter than most other juicers, comes with a 1000 mL pitcher and includes a long three-year warranty. If your counter space is limited, this might not be the right fit for you, but the Cuisinart Juice Extractor makes delicious and nutritious pulp-free juice with very little produce preparation needed.
Also, we realize that $300-plus is a lot to spend on a small appliance, but we’ve found that paying a bit more for your machine up front is worth doing. Juicing is a costly habit no matter how you do it. Although the initial investment on our pick is high, you won’t be throwing money out with partially extracted, soggy pulp. You can also check eBay and Craigslist for used juicers, especially Omegas and Huroms, because they’ve been around a while. A lot of people sell their machines after realizing they’re not ready to give up the money, counter space, or time required to make juice regularly. You won’t be able to take advantage of the warranty, but you can get really good deals (and even resell yours if you get tired of it).
Juicers that are simple to setup, use, take apart, and clean will get used more often versus relegating them to the bottom of a closet. However, if you want a multifunction juicer that also makes nut butter, sorbets, or baby food it may be worth some extra assembly. Juicers with large feed tubes significantly reduce produce prep time and also the time it takes to feed it into the machine. Juicers with external pulp containers allow you to continue juicing in bulk without pausing to remove pulp. Juicer cleaning can be daunting so seek models with specialized brushes that make cleaning easier, and dishwasher friendly is always a bonus. 
To open a can, push front of cutting assembly backwards to lift the blade. Make sure the flip-up magnet is in the up position. Tilt top of can in to position cutting blade inside rim of can. Push down top of cutting assembly to start the cutting action. To remove the can, hold the can and push backwards on front of cutting assembly again. To remove the cutting assembly for washing, twist release button on front of can opener clockwise and lift out cutting assembly. Wash, rinse, and dry thoroughly. If you want to wash the cutting assembly in the dishwasher, remove flip-up magnet first by grasping one side near hinge and pulling out slightly until magnet releases from hinge. To replace cutting assembly, place it in position and firmly press both sides until it snaps into place.
The juicer also has a big enough mouth for larger pieces of fruit, and in many cases, you'll be able to fit an entire fruit or vegetable in there without having to cut it up at all. That cuts down on prep time and ensures you won't have to dirty up knives and cutting boards to make some juice. The motor inside the juicer is 850-watt, and the device comes with a liter jug, a froth separator, and a cleaning brush.
×