Low foam production: The foam that accumulates on top of your juice is a good indicator of how much air has been whipped into your juice by the machine, and more air exposure equals more oxidation. Oxidation is a controversial topic. As Harold McGee explains in On Food and Cooking: The Science and Lore of the Kitchen, “Because juicing mixes together the contents of living cells, including active enzymes and various reactive and oxygen-sensitive substances, fresh juices are unstable and change rapidly.” So the prevailing theory among juicers is that if less oxygen is whipped into a juice, the valuable nutrients and enzymes remain more intact. But as Kohler told us, there’s not much peer-reviewed research on how or if oxidation affects the nutrient contents of your juice. “It’s all manufacturers’ data for the most part,” he said, “which I take with a grain of salt.” That said, we still prioritized machines that produced less foam, because at the very least, oxidation can cause your green juice to turn brown, and may lead to some muddy, off flavors.
"ABSOLUTELY LOVE IT!!!!!!!! I have had A LOT of juicers over the years and this one blows them all away! it is super fast and pulp is super dry. you get way more than twice the juice! I juiced a lot of veg, 2 pitchers (that it comes with about 4 cups each) and the pulp container was not even half full, yet there was no pulp in the juice! I've even had the slow masticating juicers, this is better. easy to put together, take apart and clean!!!!! i love it in every way. and before you believe that juice from slow juicers is better for you, look it up, thats what i did, and its not as long as its done fast with a good juicer! I truly love this juicer in every way! I will never go back to the lower end ones (that cost about the same anyway, oh brother!) or the expensive slow hard to use and clean ones! Wish i had this in the beginning of my juicing ventures 20 years ago!!!!!!!!!!!"
It does a superior, although not perfect, job with hard produce and zips through soft produce easily. It leaves some pulp that doesn't have all the nutritious fluid extracted from it but not enough to be a problem. On the downside, we had to do quite a bit of chopping ahead of time so that the pieces of fruit and vegetables would fit through the food chute. This juicer is easy to care for. It takes only a little time to assemble and clean, and various parts are dishwasher-safe. The machine also comes with a cleaning brush, as well as a froth separator and a tall pitcher. This is a big machine, and it is noisy but at a decibel level comparable with other good-quality juicers. You can get help with the juicer over email, but there is no phone number for customer support.
Good Housekeeping says this juicer is "as good as it gets" without having to spend a fortune, though the Breville isn't as adept at juicing greens like kale. Juicer Fanatics says that it's a great juicer for newbies who don't want to spend $300 or more for a juicer. The Wirecutter agrees that the juicer is fast and does the job passably well — so long as there aren't greens involved — but warns that it's noisy and you could get better buy spending a bit more.
The Omega J8006 Nutrition Center Juicer is a masticating type of press juicer which works at slow speeds (only 80 RPM) to efficiently extract juice from all kinds of products without generating heat and foam. The juice yield is high, is of superior quality and boasts of a shelf life of up to 72 hours. This juicer works quietly and is backed up by a 15-year warranty for your peace of mind. What’s more, it performs multiple functions as a nut butter and pasta making machine. The price may be limiting but its efficiency lets you save on produce over time. If you’re after high-quality juice, we rate this as the best masticating juicer on the market.
Good Housekeeping says this juicer is "as good as it gets" without having to spend a fortune, though the Breville isn't as adept at juicing greens like kale. Juicer Fanatics says that it's a great juicer for newbies who don't want to spend $300 or more for a juicer. The Wirecutter agrees that the juicer is fast and does the job passably well — so long as there aren't greens involved — but warns that it's noisy and you could get better buy spending a bit more.
During juicing and cleanup, we also took note of how easy the machines were to use and clean. To see how efficient each model was at extraction, we measured juice yields by weight. In addition, we checked how much pulp was left over, looked for foam (which can be a sign of oxidation), and took note of if juicers backed up or jammed during juicing. We also measured the temperature of the juice, and compared it with the temperature of the produce we started out with. Finally, we tasted each juice for freshness and pulp, docking points from machines that yielded juice with unpleasant levels of fiber. Flavor is also an indicator of how much of the greens actually made it into the glass—sweeter juices had more grape and didn’t do as good of a job juicing greens.
All plastic parts (except for the motor base) remove for easy cleanup in the dishwasher. To clean the cutter/strainer, run water over the strainer basket and brush off excess fiber buildup or pulp. The pulp bin container can be emptied by turning the extractor OFF and removing it from the unit. For easy cleanup, place a plastic grocery bag in the pulp bin container to collect the pulp and once juicing is complete, simply discard.

"This is an easy to use, easy to clean citrus juicer that I wish I had bought 25 years ago! It is versatile (will juice small fruit like limes or large fruit such as Meyer lemons and even relatively small grapefruit. There is an adjustment allowing a little or a large amount of pulp to go through with the juice. It is well made and requires only a small space for storage. I will be buying oranges by the bag to have fresh juice. Probably my favorite small appliance."

Juicers vary wildly in price starting as low as $50 to high end models for $1000, but generally, the more you pay, the higher the juice yield and the lower the pulp. How much you’re willing to invest will depend on how often you plan to juice and what type of produce you want to juice. However, it’s important to consider the price of juicing over time on top of the cost of the juicer itself. Juicers that produce lower yields mean you'll be spending a lot more on fruits and veggies over time. Expensive juicers also often come with a lengthy warranty to ensure years of quality juicing.
Be prepared to clean your juicer after every use. Bacteria love to feast on unpasteurized juices, so it’s important to clean your juicer every time you use it. And the sooner the better — the drier it gets, the harder pulp is to remove. During testing, we found that the strainer baskets and pulp spouts tended to need the most attention. So think about how often you’ll use your machine, what kind of fruits and vegetables you’ll be juicing (some leave more behind in your juicer than others), and how much time you’ll have to clean your machine.
To open a can, push front of cutting assembly backwards to lift the blade. Make sure the flip-up magnet is in the up position. Tilt top of can in to position cutting blade inside rim of can. Push down top of cutting assembly to start the cutting action. To remove the can, hold the can and push backwards on front of cutting assembly again. To remove the cutting assembly for washing, twist release button on front of can opener clockwise and lift out cutting assembly. Wash, rinse, and dry thoroughly. If you want to wash the cutting assembly in the dishwasher, remove flip-up magnet first by grasping one side near hinge and pulling out slightly until magnet releases from hinge. To replace cutting assembly, place it in position and firmly press both sides until it snaps into place.
A "smoking motor" is usually caused from binding between the cutting unit clutch and the cutting assembly which connects to the motor. Unplug the blender and allow to cool. Once the blender is cool, check the cutting assembly (see the Use and Care instructions for your model for a parts diagram) to see if the blades "spin freely." Be careful, the blades are sharp. If the blades do not spin freely, the cutting unit needs to be replaced. Once the blender base (without container) is cool, plug it in and turn it on to see if it works properly. (If the unit was not turned off when the cutting unit locked, the motor could be damaged.)
Features: Overwhelmed by all the juice options available today? Looking for the ideal juice drink that's fresh, free of preservatives and tastes 10 times better than store-bought juices? Take the plunge and go with Hamilton Beach's Big Mouth® Pro Juice Extractor. Rated “Most Efficient” in a recent issue of Food & Wine magazine, the Big Mouth® Pro Juice Extractor packs all the same punch that you would expect from a Hamilton Beach juice extractor, featuring reliable efficiency, high speed and no-fuss cleanup. With a powerful 1.1 horsepower (Hp) motor and extra-wide feed chute that fits almost anything you put in, it flawlessly performs the task of extracting the juice from a whole apple in 3 seconds flat. What’s more, the designers of Hamilton Beach have minimized the fuss of cleanup, so you can thoroughly clean in no time flat and enjoy ...
The juicer also has a big enough mouth for larger pieces of fruit, and in many cases, you'll be able to fit an entire fruit or vegetable in there without having to cut it up at all. That cuts down on prep time and ensures you won't have to dirty up knives and cutting boards to make some juice. The motor inside the juicer is 850-watt, and the device comes with a liter jug, a froth separator, and a cleaning brush.
×